{"id":238,"date":"2021-10-18T15:46:23","date_gmt":"2021-10-18T13:46:23","guid":{"rendered":"https:\/\/www.onetimenexttime.sk\/arduino\/?post_type=product&p=238"},"modified":"2024-02-22T23:24:50","modified_gmt":"2024-02-22T22:24:50","slug":"attiny85-general-micro-usb-development-board-promotion","status":"publish","type":"product","link":"https:\/\/www.onetimenexttime.sk\/arduino\/index.php\/produkt\/attiny85-general-micro-usb-development-board-promotion\/","title":{"rendered":"ATTINY85 General Micro USB Development Board Promotion"},"content":{"rendered":"

 <\/p>\n

ATTINY85 doska Micro USB<\/h1>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

V\u00fdvojov\u00e1 doska ATTINY85 s mikro USB sa pou\u017e\u00edva na vytv\u00e1ranie a testovanie r\u00f4znych elektronick\u00fdch projektov. Je vhodn\u00e1 pre v\u00fdvoj\u00e1rov a nad\u0161encov, ktor\u00ed potrebuj\u00fa kompaktn\u00e9 a programovate\u013en\u00e9 rie\u0161enie pre svoje projekty. Tu s\u00fa niektor\u00e9 z hlavn\u00fdch d\u00f4vodov, pre\u010do sa pou\u017e\u00edva:<\/p>\n

    \n
  1. Programovate\u013enos\u0165:<\/strong> Doska je programovate\u013en\u00e1 pomocou r\u00f4znych v\u00fdvojov\u00fdch prostred\u00ed, ako napr\u00edklad Arduino IDE, \u010do umo\u017e\u0148uje vytv\u00e1ra\u0165 vlastn\u00e9 aplik\u00e1cie a programy.<\/li>\n
  2. Kompaktnos\u0165:<\/strong> Je kompaktn\u00e1 a jednoduch\u00e1 na integr\u00e1ciu do r\u00f4znych projektov. Je ide\u00e1lna pre aplik\u00e1cie, kde je priestor obmedzen\u00fd.<\/li>\n
  3. N\u00edzka cena:<\/strong> Doska je cenovo dostupn\u00e1 a poskytuje vysok\u00fd v\u00fdkon za svoju cenu, \u010do ju rob\u00ed popul\u00e1rnou vo v\u00fdvoj\u00e1rskych komunit\u00e1ch.<\/li>\n
  4. Flexibilita:<\/strong> Podporuje r\u00f4zne senzory a perif\u00e9rne zariadenia, \u010do umo\u017e\u0148uje vytv\u00e1ra\u0165 r\u00f4znorod\u00e9 projekty od jednoduch\u00fdch meran\u00ed po pokro\u010dil\u00e9 automatiza\u010dn\u00e9 \u00falohy.<\/li>\n
  5. Prenosnos\u0165:<\/strong> V\u010faka mikro USB konektoru je jednoduch\u00e9 pripoji\u0165 dosku k po\u010d\u00edta\u010du a naprogramova\u0165 ju, \u010do zjednodu\u0161uje v\u00fdvoj a ladenie projektov.<\/li>\n<\/ol>\n

     <\/p>\n

     <\/p>\n

    V\u00fdvojov\u00e1 doska ATTINY85 je v\u010faka svojej mal\u00e9mu rozmeru a flexibilite vhodn\u00e1 na pripojenie r\u00f4znych senzorov, aktu\u00e1torov a \u010fal\u0161\u00edch perif\u00e9rnych zariaden\u00ed. Tu je nieko\u013eko pr\u00edkladov toho, \u010do s \u0148ou m\u00f4\u017eete ovl\u00e1da\u0165 alebo pripoji\u0165:<\/p>\n

      \n
    1. Senzory teploty a vlhkosti:<\/strong> Napr\u00edklad DHT11 alebo DHT22 senzory umo\u017e\u0148uj\u00fa monitorova\u0165 teplotu a vlhkos\u0165 vo va\u0161om prostred\u00ed.<\/li>\n
    2. Pohybov\u00e9 senzory:<\/strong> Senzory ako PIR (Passive Infrared) m\u00f4\u017eu detekova\u0165 pohyb a sl\u00fa\u017ei\u0165 na ovl\u00e1danie svetiel alebo alarmov.<\/li>\n
    3. Sveteln\u00e9 senzory:<\/strong> Fotorezistory alebo fototranzistory m\u00f4\u017eu sl\u00fa\u017ei\u0165 na detekciu intenzity svetla a prisp\u00f4sobenie osvetlenia pod\u013ea okolitej situ\u00e1cie.<\/li>\n
    4. Ultrazvukov\u00e9 senzory:<\/strong> Senzory ultrazvuku m\u00f4\u017eu mera\u0165 vzdialenos\u0165 od prek\u00e1\u017eok a pou\u017e\u00edva\u0165 sa napr\u00edklad pri robotike alebo v bezpe\u010dnostn\u00fdch syst\u00e9moch.<\/li>\n
    5. Senzory zvuku:<\/strong> Mikrof\u00f3ny m\u00f4\u017eu sl\u00fa\u017ei\u0165 na detekciu zvukov\u00fdch sign\u00e1lov alebo na meranie hladiny hluku v okol\u00ed.<\/li>\n
    6. LED displeje:<\/strong> LED displeje m\u00f4\u017eu by\u0165 pou\u017eit\u00e9 na zobrazovanie inform\u00e1ci\u00ed alebo stavov\u00fdch indik\u00e1torov.<\/li>\n
    7. Elektromechanick\u00e9 rel\u00e9:<\/strong> Rel\u00e9 m\u00f4\u017eu sl\u00fa\u017ei\u0165 na prep\u00ednanie v\u00e4\u010d\u0161\u00edch elektrick\u00fdch z\u00e1\u0165a\u017e\u00ed ako s\u00fa napr\u00edklad svetl\u00e1 alebo elektromotory.<\/li>\n
    8. LED p\u00e1sky:<\/strong> RGB LED p\u00e1sky alebo jednofarebn\u00e9 LED p\u00e1sky m\u00f4\u017eu by\u0165 pou\u017eit\u00e9 na osvetlenie a vytv\u00e1ranie farebn\u00fdch efektov.<\/li>\n<\/ol>\n

       <\/p>\n

       <\/p>\n\n\n\n\n\n\n\n\n
      Popis<\/th>\nV\u00fdvojov\u00e1 doska ATTINY85 s mikro USB<\/td>\n<\/tr>\n
      Vlastnosti<\/th>\nProgramovate\u013en\u00e1, kompaktn\u00e1, jednoduch\u00e1 integrovan\u00e1 v\u00fdvojov\u00e1 doska<\/td>\n<\/tr>\n
      \u0160pecifik\u00e1cie<\/th>\n\n
        \n
      1. Podpora pre Arduino IDE 1.0+ (OSX\/Win\/Linux).<\/li>\n
      2. Nap\u00e1janie cez USB alebo extern\u00fd zdroj – 5v alebo 7-16v (automatick\u00fd v\u00fdber).<\/li>\n
      3. Vstavan\u00fd 150mA 5V regul\u00e1tor.<\/li>\n
      4. Zabudovan\u00e9 USB (a s\u00e9riov\u00e9 ladenie).<\/li>\n
      5. 6 I\/O pinov (2 sa pou\u017e\u00edvaj\u00fa pre USB, iba ak v\u00e1\u0161 program akt\u00edvne komunikuje cez USB, inak m\u00f4\u017eete pou\u017ei\u0165 v\u0161etk\u00fdch 6, aj ke\u010f programujete cez USB).<\/li>\n
      6. 8k Flash pam\u00e4\u0165 (asi 6k po bootloaderi).<\/li>\n
      7. I2C a SPI (vi\u010f USI).<\/li>\n
      8. PWM na 3 pinoch (viac mo\u017en\u00e9 so softv\u00e9rov\u00fdm PWM).<\/li>\n
      9. ADC na 4 pinoch.<\/li>\n
      10. LED di\u00f3da nap\u00e1jania a kontrolka LED testu\/stavu.<\/li>\n<\/ol>\n<\/td>\n<\/tr>\n
      Pr\u00edklady pou\u017eitia<\/th>\nV\u00fdvoj r\u00f4znych elektronick\u00fdch projektov, automatiz\u00e1cia dom\u00e1cnosti, meranie teploty a vlhkosti<\/td>\n<\/tr>\n
      Pr\u00edkladov\u00fd k\u00f3d pre Arduino<\/th>\n\n
              \/\/ Vzorov\u00fd k\u00f3d pre ATTINY85 s Arduino IDE\r\n        void setup() {\r\n          \/\/ Inicializ\u00e1cia\r\n        }\r\n        \r\n        void loop() {\r\n          \/\/ Hlavn\u00e1 slu\u010dka\r\n        }\r\n<\/pre>\n<\/td>\n<\/tr>\n
      Pr\u00edkladov\u00fd k\u00f3d pre ESPHome<\/th>\n\n
      \n
      Tu je alternat\u00edvna konfigur\u00e1cia nastaven\u00e1 na ovl\u00e1danie gejz\u00edru, pri\u010dom ATTiny85 funguje ako 1-dr\u00f4tov\u00e1 sonda DS18B20 pomocou OneWireHub. Z\u00e1merom je pou\u017ei\u0165 prebyto\u010dn\u00fa slne\u010dn\u00fa energiu na zohriatie gejz\u00edru v re\u017eime Boost, vr\u00e1ti\u0165 sa cez noc do re\u017eimu Eco a v pr\u00edpade, \u017ee nie je k dispoz\u00edcii \u017eiadny extern\u00fd ovl\u00e1da\u010d, predvolen\u00e9 nastavenie na Home.<\/div>\n
      Kop\u00edrova\u0165<\/div>\n
      substitutions:<\/div>\n
      \u00a0 name: “geyser”<\/div>\n
      \u00a0 friendly_name: “Geyser Thermostat”<\/div>\n
      \u00a0 project_name: “thermostats”<\/div>\n
      \u00a0 project_version: “1.0”<\/div>\n
      packages:<\/div>\n
      \u00a0 # contains basic setup, WiFi, etc<\/div>\n
      \u00a0 common: !include .common.yaml<\/div>\n
      esphome:<\/div>\n
      \u00a0 name: “${name}”<\/div>\n
      \u00a0 friendly_name: “${friendly_name}”<\/div>\n
      \u00a0 on_boot:<\/div>\n
      \u00a0 \u00a0 – priority: 90<\/div>\n
      \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 # supply the external sensor with 3v power by pulling this GPIO high<\/div>\n
      \u00a0 \u00a0 \u00a0 – output.turn_on: sensor_power<\/div>\n
      \u00a0 \u00a0 \u00a0 # make sure the relay is in a known state at startup<\/div>\n
      \u00a0 \u00a0 \u00a0 – switch.turn_off: main_relay<\/div>\n
      \u00a0 \u00a0 \u00a0 # Default to running the geyser in Home mode<\/div>\n
      \u00a0 \u00a0 \u00a0 – climate.control:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 id: geyser_climate<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 preset: “Home”<\/div>\n
      esp32:<\/div>\n
      \u00a0 board: nodemcu-32s<\/div>\n
      logger:<\/div>\n
      \u00a0 # It’s in the ceiling, nobody is listening to the UART<\/div>\n
      \u00a0 baud_rate: 0<\/div>\n
      \u00a0 level: DEBUG<\/div>\n
      web_server:<\/div>\n
      \u00a0 port: 80<\/div>\n
      captive_portal:<\/div>\n
      binary_sensor:<\/div>\n
      \u00a0 # single main button that also puts device into flash mode when held on boot<\/div>\n
      \u00a0 # For someone in the ceiling, this can be used to turn the climate control<\/div>\n
      \u00a0 # into OFF or HEAT modes. It does NOT directly control the relay.<\/div>\n
      \u00a0 – platform: gpio<\/div>\n
      \u00a0 \u00a0 pin:<\/div>\n
      \u00a0 \u00a0 \u00a0 number: GPIO0<\/div>\n
      \u00a0 \u00a0 \u00a0 mode: INPUT_PULLUP<\/div>\n
      \u00a0 \u00a0 \u00a0 inverted: True<\/div>\n
      \u00a0 \u00a0 id: button0<\/div>\n
      \u00a0 \u00a0 filters:<\/div>\n
      \u00a0 \u00a0 \u00a0 – delayed_on_off: 50ms<\/div>\n
      \u00a0 \u00a0 on_press:<\/div>\n
      \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 – if:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 condition:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 lambda: |-<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 return id(geyser_climate).mode != CLIMATE_MODE_OFF;<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – logger.log: “Button deactivates climate control”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – climate.control:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 id: geyser_climate<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 mode: “OFF”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 else:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – logger.log: “Button activates climate control”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – climate.control:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 id: geyser_climate<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 mode: “HEAT”<\/div>\n
      switch:<\/div>\n
      \u00a0 # template switch to represent the main relay<\/div>\n
      \u00a0 # this is synchronised with the RED LED<\/div>\n
      \u00a0 # Note: this is controlled by the climate entity, and is not exposed<\/div>\n
      \u00a0 # for direct manipulation, otherwise it could be left on permanently<\/div>\n
      \u00a0 – platform: template<\/div>\n
      \u00a0 \u00a0 id: main_relay<\/div>\n
      \u00a0 \u00a0 turn_on_action:<\/div>\n
      \u00a0 \u00a0 \u00a0 – button.press: main_relay_on<\/div>\n
      \u00a0 \u00a0 \u00a0 – light.turn_on: onoff_led<\/div>\n
      \u00a0 \u00a0 turn_off_action:<\/div>\n
      \u00a0 \u00a0 \u00a0 – button.press: main_relay_off<\/div>\n
      \u00a0 \u00a0 \u00a0 – light.turn_off: onoff_led<\/div>\n
      \u00a0 \u00a0 assumed_state: True<\/div>\n
      \u00a0 \u00a0 optimistic: True<\/div>\n
      \u00a0 \u00a0 restore_state: True<\/div>\n
      output:<\/div>\n
      \u00a0 # Ideally, these two relay GPIOs should be interlocked to prevent<\/div>\n
      \u00a0 # simultaneous operation. ESPhome currently does not support<\/div>\n
      \u00a0 # interlocks at an output: level, or even at a button: level<\/div>\n
      \u00a0 # BE CAREFUL!<\/div>\n
      \u00a0 – platform: gpio<\/div>\n
      \u00a0 \u00a0 id: main_relay_on_output<\/div>\n
      \u00a0 \u00a0 pin:<\/div>\n
      \u00a0 \u00a0 \u00a0 number: GPIO19<\/div>\n
      \u00a0 \u00a0 \u00a0 inverted: true<\/div>\n
      \u00a0 – platform: gpio<\/div>\n
      \u00a0 \u00a0 id: main_relay_off_output<\/div>\n
      \u00a0 \u00a0 pin:<\/div>\n
      \u00a0 \u00a0 \u00a0 number: GPIO22<\/div>\n
      \u00a0 \u00a0 \u00a0 inverted: true<\/div>\n
      \u00a0 – platform: ledc<\/div>\n
      \u00a0 \u00a0 id: red_led_output<\/div>\n
      \u00a0 \u00a0 pin:<\/div>\n
      \u00a0 \u00a0 \u00a0 number: GPIO16<\/div>\n
      \u00a0 \u00a0 \u00a0 inverted: true<\/div>\n
      \u00a0 – platform: ledc<\/div>\n
      \u00a0 \u00a0 id: green_led_output<\/div>\n
      \u00a0 \u00a0 pin:<\/div>\n
      \u00a0 \u00a0 \u00a0 number: GPIO13<\/div>\n
      \u00a0 \u00a0 \u00a0 inverted: true<\/div>\n
      \u00a0 # This is needed to power the external sensor.<\/div>\n
      \u00a0 # It receives 3v3 from this pin, which is pulled up on boot.<\/div>\n
      \u00a0 – platform: gpio<\/div>\n
      \u00a0 \u00a0 pin: GPIO27<\/div>\n
      \u00a0 \u00a0 id: sensor_power<\/div>\n
      button:<\/div>\n
      \u00a0 # See note above about interlocks!<\/div>\n
      \u00a0 – platform: output<\/div>\n
      \u00a0 \u00a0 id: main_relay_on<\/div>\n
      \u00a0 \u00a0 output: main_relay_on_output<\/div>\n
      \u00a0 \u00a0 duration: 100ms<\/div>\n
      \u00a0 – platform: output<\/div>\n
      \u00a0 \u00a0 id: main_relay_off<\/div>\n
      \u00a0 \u00a0 output: main_relay_off_output<\/div>\n
      \u00a0 \u00a0 duration: 100ms<\/div>\n
      # The middle (blue) LED is used as wifi status indicator.<\/div>\n
      status_led:<\/div>\n
      \u00a0 pin:<\/div>\n
      \u00a0 \u00a0 number: GPIO15<\/div>\n
      \u00a0 \u00a0 inverted: true<\/div>\n
      light:<\/div>\n
      \u00a0 # Leftmost (red) LED that’s used to indicate the relay being on\/off<\/div>\n
      \u00a0 – platform: binary<\/div>\n
      \u00a0 \u00a0 id: onoff_led<\/div>\n
      \u00a0 \u00a0 output: red_led_output<\/div>\n
      \u00a0 \u00a0 internal: true<\/div>\n
      \u00a0 # Rightmost (green) LED used to indicate climate control being active<\/div>\n
      \u00a0 – platform: binary<\/div>\n
      \u00a0 \u00a0 id: auto_led<\/div>\n
      \u00a0 \u00a0 output: green_led_output<\/div>\n
      \u00a0 \u00a0 internal: true<\/div>\n
      sensor:<\/div>\n
      \u00a0 # Geyser temperature<\/div>\n
      \u00a0 # Has some failsafes to disable climate control if the temperature<\/div>\n
      \u00a0 # being reported is unreasonable. Below 10C suggests that the ATTiny85<\/div>\n
      \u00a0 # is either not connected to the thermistor, or is otherwise reporting<\/div>\n
      \u00a0 # incorrect values, and should be investigated.<\/div>\n
      \u00a0 #<\/div>\n
      \u00a0 # NOTE: This can be overridden, but care should be taken when doing so<\/div>\n
      \u00a0 # because these only apply when the temperature ENTERS these ranges<\/div>\n
      \u00a0 # If it REMAINS in the range, and climate is turned on manually, these<\/div>\n
      \u00a0 # failsafes will not apply!<\/div>\n
      \u00a0 – platform: dallas<\/div>\n
      \u00a0 \u00a0 address: 0x1e11223344550028<\/div>\n
      \u00a0 \u00a0 id: temp<\/div>\n
      \u00a0 \u00a0 name: “Temperature”<\/div>\n
      \u00a0 \u00a0 on_value_range:<\/div>\n
      \u00a0 \u00a0 \u00a0 – below: 10.0<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – logger.log: “Temperature too low, disabling climate!”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – climate.control:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 id: geyser_climate<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 mode: “OFF”<\/div>\n
      \u00a0 \u00a0 \u00a0 – above: 70.0<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – logger.log: “Temperature too high, disabling climate!”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – climate.control:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 id: geyser_climate<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 mode: “OFF”<\/div>\n
      \u00a0 # The THR320 appears to run quite hot, let’s just keep an eye on it<\/div>\n
      \u00a0 – platform: internal_temperature<\/div>\n
      \u00a0 \u00a0 name: “Internal Temperature”<\/div>\n
      climate:<\/div>\n
      \u00a0 – platform: thermostat<\/div>\n
      \u00a0 \u00a0 id: geyser_climate<\/div>\n
      \u00a0 \u00a0 name: “Climate”<\/div>\n
      \u00a0 \u00a0 sensor: temp<\/div>\n
      \u00a0 \u00a0 visual:<\/div>\n
      \u00a0 \u00a0 \u00a0 min_temperature: 45C<\/div>\n
      \u00a0 \u00a0 \u00a0 max_temperature: 70C<\/div>\n
      \u00a0 \u00a0 \u00a0 temperature_step:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 target_temperature: 1<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 current_temperature: 1<\/div>\n
      \u00a0 \u00a0 default_preset: Home<\/div>\n
      \u00a0 \u00a0 preset:<\/div>\n
      \u00a0 \u00a0 \u00a0 – name: Home<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 default_target_temperature_low: 55C<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 mode: heat<\/div>\n
      \u00a0 \u00a0 \u00a0 – name: Boost<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 default_target_temperature_low: 65C<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 mode: heat<\/div>\n
      \u00a0 \u00a0 \u00a0 – name: Eco<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 default_target_temperature_low: 45C<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 mode: heat<\/div>\n
      \u00a0 \u00a0 min_heating_off_time: 0s<\/div>\n
      \u00a0 \u00a0 min_heating_run_time: 60s<\/div>\n
      \u00a0 \u00a0 min_idle_time: 30s<\/div>\n
      \u00a0 \u00a0 heat_action:<\/div>\n
      \u00a0 \u00a0 \u00a0 – switch.turn_on: main_relay<\/div>\n
      \u00a0 \u00a0 idle_action:<\/div>\n
      \u00a0 \u00a0 \u00a0 – switch.turn_off: main_relay<\/div>\n
      \u00a0 \u00a0 heat_deadband: 2 # how many degrees can we go under the temp before starting to heat<\/div>\n
      \u00a0 \u00a0 heat_overrun: 0.5 # how many degrees can we go over the temp before stopping<\/div>\n
      \u00a0 \u00a0 off_mode:<\/div>\n
      \u00a0 \u00a0 \u00a0 – switch.turn_off: main_relay<\/div>\n
      \u00a0 \u00a0 on_state:<\/div>\n
      \u00a0 \u00a0 – if:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 condition:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 lambda: |-<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 return id(geyser_climate).mode == CLIMATE_MODE_OFF;<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – logger.log: “Climate control OFF”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – light.turn_off: auto_led<\/div>\n
      \u00a0 \u00a0 – if:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 condition:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 lambda: |-<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 return id(geyser_climate).mode == CLIMATE_MODE_HEAT;<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 then:<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – logger.log: “Climate control ON”<\/div>\n
      \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 – light.turn_on: auto_led<\/div>\n
      dallas:<\/div>\n
      \u00a0 pin: GPIO25<\/div>\n
      \u00a0 update_interval: 10s<\/div>\n<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      Ako sa pou\u017e\u00edva: Vlo\u017ete ATTINY85 do v\u00fdvojovej dosky, pripojte ju cez mikro USB k po\u010d\u00edta\u010du, nain\u0161talujte potrebn\u00e9 ovl\u00e1da\u010de a softv\u00e9r (napr. Arduino IDE) a m\u00f4\u017eete za\u010da\u0165 programova\u0165 a testova\u0165 svoje projekty.<\/p>\n